Get the most out of your flat-screen TV with the Klipsch HD Theater 300. It delivers the sheer power, detail and emotion of every film, music or video game soundtrack.
Perfect for smaller rooms Center channel provides precise dialogue
Powerful subwoofer delivers deep-driving bass
Clean, modern design looks great in any room
Wall brackets, ¼-20 inserts for stand mounting
Center channel comes with cradle base
Klipsch HD Theater 300 is a compact, high-definition 5.1 home theater system that’s simple to set up and use. It consists of five speakers—left, center and right front channels with two rear surrounds—and one powered subwoofer. Please note this system does not include an A/V receiver, speaker wire or a subwoofer cable.
ach main and surround speaker is a sealed enclosure finished in high-gloss black with a 2.5-inch IMG woofer and a MicroTractrix Horn-loaded 0.75-inch textile tweeter inside. The center channel shares the same driver attributes except it is magnetically shielded, so it won’t interfere with your TV picture.
But what makes these speakers and center channel truly unique is their horn-loaded technology, an exclusive design that has made Klipsch an industry leader for over 60 years. It allows the HD Theater 300 to deliver genuine lifelike sound and produce more output, using less energy. In other words, it doesn’t require a lot of amplifier power to drive it. Over half of all new theaters in North America and several other countries choose Klipsch professional products because of the amazing benefits of horn technology.
The speakers—which can be positioned vertically or horizontally—come with adjustable wall brackets that have a 40° range of motion and ¼-20 inserts for stand mounting. The center channel includes a cradle base that has a 45° range of motion. These qualities give you complete installation flexibility when placing this premium home theater in your room.
The subwoofer delivers room-shaking bass thanks to a powerful amplifier and a 6.5-inch driver. Featuring a sleek black pica vinyl finish, this hard-hitter also includes traditional volume, crossover and phase controls, so you can customize the level of bass for your room.
Sound accounts for half of your home theater experience, whether you’re watching a movie or sporting event—or even playing a video game. Your TV is only one piece of the puzzle. It’s the audio that drives the action, creates the mood and brings your video content to life.
Each of the system’s molded plastic satellites is about the same size as a can of soda, but with a little more girth. A removable grille covers a 2.5-inch woofer and a 3/4-inch tweeter, while a pair of spring-clip terminals around the back will accept up to 16-guage bare wire. With each speaker weighing just a few pounds, wall mounting is a definite option. To that end, Klipsch includes a plastic mount that allows the satellites to be swiveled toward the listening position for optimal imaging. The center speaker is really just a slightly longer version of the other satellites. Along with the wall bracket, it includes a plastic cradle that allows its rounded shape to sit flat on a shelf without rocking.
Since itty-bitty satellites can’t reach very deep into the bass, any subwoofer you match with them will have to cover a lot of sonic ground. The HD Theater 300’s Sub 6 uses an 80-watt amplifier to drive a 6.5-inch woofer in a ported enclosure, and it has the demanding task of providing all of the system’s sound from about 150 Hz down. In addition to a level control and line- and speaker-level inputs, it has a phase-reversal switch and a non-bypassable low-pass filter crossover. A signal-sensing power mode turns the sub on and off as needed so you can just set it and forget it.
Klipsch HD Theater 300 Specifications
| FREQUENCY RESPONSE | System: 40Hz – 20kHz Sats: 150Hz – 20kHz Sub: 40Hz – 200Hz |
| recommended amplifier power | Up to100 watts/ch |
| NOMINAL IMPEDANCE | 8 Ohms Compatible |
| MAXIMUM ACOUSTIC OUTPUT | 1 1 0 dB |
| DRIVE COMPONENTS | Tweeters: 0.75” textile Mid-bass Drivers: 2.5” IMG Subwoofer: 6.5” fiber-composite cone |
| PHASE | Switch, 0° or 180° |
| ENCLOSURE MATERIAL | Sats: ABS plastic Sub: Vinyl wrapped MDF |
| ENCLOSURE TYPE | Sats: Closed Sub: Bass-reflex via rear-firing port |
| DIMENSIONS | H x W x D Satellite: 5.5” x 3.6” x 3.85” Center Channel: 3.6” x 7.5” x 3.85” Sub: 11.8” x 9.9” x 14.6” |
| FINISHES | Sats: Satin black Sub: Black pica vinyl |
Source: klipsch.com
People who looked at this audio video item also looked at…
Home Theater Related items
Popularity: 11% [?]
